HVAC + Needlepoint = Great Indoor Air Quality
When you schedule your one-hour appointment for your spring AC tune up with billyGO, be sure to ask your technician about needlepoint.
This needlepoint isn’t embroidery, it’s needlepoint bipolar ionization (NBPI™) technology that delivers breathtakingly clean air in your home year-around.
Unlike other whole-house air purifiers, this technology can be added to your existing HVAC system without expensive modifications.
How Traditional Air Purifiers Work
Whole house air purifiers are designed to remove pollen and dust particles, microbes and gasses from indoor air, but usually not all three.
- Particles – equipment includes fibrous filters, electrostatic precipitators and ionizers
- Microbes – ultraviolet lights
- Gasses – absorbent media filters, catalytic oxidation and plasma generators
Most homes have only fibrous air filters, which trap airborne particles of different sizes based on the filter’s Minimum Efficiency Reporting Value (MERV) rating of 1-16.
The higher the number, the more efficient the filter. Most fibrous filters provide little, if any, protection from microbes and gasses.
Now there is needlepoint bipolar ionization, which addresses all three classes of contaminants. Unlike other ionizers, it does not produce ozone or other harmful byproducts.
Most household NBPI units have no moving parts, are self-cleaning and reach deep into AC coils and ductwork to clean them as they clean the air — all while using incredibly little electricity.
What Is Needlepoint Bipolar Ionization?
Needlepoint bipolar ionization saturates indoor air with a high concentration of equal parts positive and negative ions placed directly into the airstream inside your HVAC system.
The ions deactivate pathogens and pollutants at the molecular level, in the air and on surfaces. They capture dust, pet dander, pollen, mold spores, pathogens and other particulates, leaving no dusty residue on your furniture. They also neutralize gasses and odors.
NBPI technology breaks down pollutants and gases into oxygen, carbon dioxide, nitrogen, water vapor and other harmless compounds. They also gather fine, sub-micron particles into bundles big enough for your air filters to capture.
Highly Effective Against COVID-19 and Other Viruses
Third-party laboratory tests show iWave NBPI technology highly effective against SARS-Cov-2, the COVID-19 virus. Results demonstrated 90%-99.4% reductions in these viruses in 60 minutes or less.
Here’s a quick review of the benefits of needlepoint bipolar ionization technology.
- Highly effective against particles, microbes (including SARS-CoV-2), and gasses
- Less expensive than other, less capable technologies
- Can be added to existing HVAC systems without expensive modifications
- No moving parts to wear out
- Low energy usage
- Self-cleaning – requires very little maintenance
You can have NBPI air purification in your home now by scheduling your own one-hour appointment at billygo.com. Select “Air Purification” in the drop-down menu.
Schedule Your AC Tune Up Now
If you’ve been putting off scheduling your spring air conditioning tune up, you’ll kick yourself when you see how easy it is to schedule the time and day you prefer with billyGO – without even making a phone call.
Here are some of the things we do for every AC tune up.
- Check condenser coil (outside unit)
- Check and clean evaporator coil (inside unit)
- Inspect drain lines that carry away condensation
- Check operation of blower fan
- Check operating pressures for proper refrigerant charge
- Test ductwork for good airflow
- Monitor air conditioning cycle and adjust blower components
- Inspect air filter, change as needed
- Lubricate moving parts, where applicable
- Monitor voltage and amperage draw on motors
- Check and tighten all loose electrical connections
- Clean and adjust thermostat as necessary
- Check AC parts for general wear and tear
Be sure to ask your technician about getting safer, cleaner air throughout your home with a needlepoint bipolar ionization whole-house air purifier.
Step Up to the billyGO Difference!
billyGO is the Southlake AC and plumbing company that lets you tell us when to be at your home. You set the day and time for your one-hour appointment, instead of “morning” or “afternoon,” so you can go on with your other activities without having to kill half a day waiting around.
You never pay a dispatching fee with billyGO because our patent-pending serviceSHIFT software also handles all dispatching. When your tech is on the way you get the tech’s photo and brief biographical information.
billyGO, is about time – YOUR time. Isn’t it about time for you to try billyGO?
